Selection Of Parameter Adjustments For An Individual Hydraulic Scheme; Applications - Honeywell SDC Serie Montageanleitung

SDC / DHC
4 Selection of Parameter adjustments for an individual
hydraulic scheme
Each type of controller can cover several hydraulic applications. Each hydraulic
application can be changed or modified by changing parameter adjustments.
A documented hydraulic scheme can be selected with parameter 01 in the menu
Hydraulik. According to the hydraulic scheme the inputs and outputs are
automatically enabled.
This function simplifies the adjustment of documented hydraulic schemes very
much.
For additional or different functionalities it is still necessary to edit according to the
parameter list and make changes there. For the trained heating installer of course
there are many more possibilities for hydraulic schemes which differ from the
documented cases. Some applications in this list contain an individual parameter
adjustment.
The description how to get into the editing mode for parameters can be found in
the parameter list under "parameter input".
Operation:
Operating sign
Hydraulic Pre-selection
5

Applications

See chap.Heating Applications p. 37 and chap. District Heating Applications, p.
57.
MU1H-0207GE51 R1206
Button /
Parameter tree
HYDRAULIC
28
Parameter
PARAMETER 01
Enter scheme,
e.g.:
0201