Olivetti ECR 2450 euro Kurzanleitung Seite 6

7. CHANGE THE DECIMAL POINT POSITION
The decimal point setting is preset to the x.xx format. This format can be changed, as needed, to one of the other
settings below.
1. Turn the PRG key to the PRG position.
2. Type the status number [0, 1, 2 or 3] to select the desired format as indicated in the following table:
Status Number
0
1
2
3
3. Press the [-%/RA] key to set the new format. The setting made is automatically printed along with the caption
"R-A-".
4. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF
position.
Example: Program the cash register so that two digits are left after the decimal point.
Type/Press:
[2] + [-%/RA]
8. CREATE A PRICE LOOK-UP (PLU)
1. Turn the PRG key to the PRG position.
2. Press the [Qty/Date] key. The message "PLU PRICE" appears on the operator display and the number 001 is
displayed on the left-hand side of the displays to indicate the first PLU number. If you wish to change the PLU
number from 001 to another number such as 30, type [030] and then press the [PLU] key.
3. Type the [unit price] that you wish to assign to that PLU.
4. Press the appropriate [Department] key to assign the PLU to a Department from 1 to 20. Use the [Dept Shift]
key for departments from 21-40. The message "PLU NAME" is displayed while the PLU number, item price and
department number are printed.
5. With reference to the Character Code Table in the Appendix of the Instructions Manual or by using the
alphanumeric keypad, define a maximum 10-character description to the PLU item. For example, the item Coffee
will have the [43 55 46 46 45 45] character code string if the Character Code Table is used.
6. Press the [Check] key to store the PLU item description which is printed. The cash register automatically
switches to the next PLU item number.
7. Press the [Qty/Date] key to program another feature or to exit the program mode by turning the PRG key to the
OFF position.
Example: Create PLU 1 with a unit price of £2.69 assigned to Department 3 and name this item Coffee
by using the Character Code Table provided in the Instructions Manual and then create PLU 320
with a unit price of £5.00 assigned to Department 33 and name this item Book by using the
alphanumeric keypad.
Type/Press:
[Qty/Date] + [269] + [Department 3/23] + [43 55 46 46 45 45] + [Check] + [320] + [PLU] +
[500] + [Dept Shift] + [Dept 13/33] + [Dept 2/22 Dept 15/35 Dept 15/35 Dept 11/31] +
[Check] + [Qty/Date]
4
Format
x
x.x
x.xx
x.xxx