SOLAC ESPRESSION SUPREMMA CA 4815 Gebrauchsanleitung Seite 46

A) ADJUSTING THE AMOUNT OF WATER FOR AN ESPRESSO COFFEE
1. The coffee-maker is ready.
2. Press the 'P' button to enter the programming menu.
3. The first programme is for adjusting the amount of water per cup.
You can programme the amount for each type of coffee you can
obtain. To help you, the four possibilities will begin to flash.
4. To programme the amount of water for an espresso coffee, press the
corresponding button.
5. After pressing the button for 1 cup of espresso coffee, you enter the
menu for programming the amount of water.
Press the 'arrow' to increase the amount of water by 10 ml from 30 ml
to 60 ml.
By default, the coffee-maker is programmed with 40 ml for an es-
presso coffee.
6. To confirm your selection, press 'P'.
To exit the programming mode, press 'Esc'.
7. The coffee-maker is ready.
Sequence Press the button
17
Message on screen