SOLAC ESPRESSION SUPREMMA CA 4815 Gebrauchsanleitung Seite 42

a) To confirm the lime scale removal process, press the 'P'
button.
b) To exit the process, press the 'ESC' button.
IMPORTANT! If you have poured the removal agent into the
water tank, remove it to make sure you do not use it by mis-
take to prepare a coffee.
N.B. if you exit the lime scale removal process once it has be-
gun, press the ESC button for the programme to continue the
rinse cycle. This will prevent traces of the removal agent re-
maining inside the appliance.
9. Once the lime scale removal process has been confirmed,
the coffee-maker will indicate that the process is starting
on the screen.
The duration of the process will be indicated on the bar that ap-
pears on the screen. The bar will complete as time progresses.
10. The screen will indicate the need to fill the water tank
with clean water and will tell you to empty the drip tray.
11. Empty the remaining water from the tank and fill it with
clean water. Empty the drip tray.
12. Once the lime scale removal process has finished, the
system must be rinsed to make sure that all remains of the
removal agent are removed. To rinse the appliance, press
the 'P' button again.
13. The coffee-maker will indicate that the rinse process has
begun.
14. The bar will be completed as time progresses.
15. After the rinse process, the coffee-maker is ready to make
coffee..
N.B. The 'no water' icon may appear during the lime scale re-
moval and rinse processes. Once the water tank is filled, this
symbol will disappear and the process will continue.
17 CLEANING AND MAINTENANCE
IMPORTANT! Do not place the coffee-maker in water or any
other liquid or place any of its parts in a dishwasher.
IMPORTANT! Do not dry the coffee-maker or any of its parts
in an oven and/or microwave.
A) BASIC CLEANING
1. Turn off the coffee-maker (position '0').
2. Unplug the coffee-maker.
3. Clean the water tank.
13
.