SOLAC ESPRESSION SUPREMMA CA 4815 Gebrauchsanleitung Seite 45

14. Close the side cover.
IMPORTANT! When handling the unit for cleaning, the inter-
nal system that compacts the coffee may
move easily. To return it to its original posi-
tion, use the brewing unit spanner supplied
with the coffee-maker. Make sure that the
marks on the fixed and moving parts coin-
cide. If not, proceed as follows:
Insert the spanner in the lock.
Turn the spanner to the left (anticlockwise) until the two
marks on the fixed and moving parts coincide.
C) AUTO-CLEANING FUNCTION
The coffee-maker automatically performs three system-
cleaning processes:
1) When you turn on the coffee-maker, it cleans the pipes
with a little hot water to make sure that the coffee it makes
does not contain any traces of water left in the pipes from
coffee made previously.
2) Before turning off and to prevent the coffee outlet from
being blocked with coffee remains, the coffee-maker ex-
pels a little water and cleans the coffee outlet. This func-
tion has been designed to save you from having to carry
out this cleaning process manually.
3) If the auto-off function is disconnected, the coffee-maker
will perform auto-cleaning every 14 cups (when the
grounds compartment is emptied).
18 PROGRAMMING YOUR COFFEE-MAKER
The coffee-maker is programmed for use without it being
necessary to modify any parameters, but it offers the possibil-
ity of adapting it to your personal preferences easily and in-
tuitively. Consequently, we have designed a simple menu for
defining the various functions of the coffee-maker.
You can programme the amount of water per cup. By default,
the coffee-maker is programmed with a certain amount of
water for an espresso or large coffee. You can modify the
amount of water set for each type of coffee and adapt it to
your personal preferences.
The coffee-maker can turn itself off to save energy and you
can relax when you leave your home, knowing that it will
disconnect. Depending on the use you make of your coffee-
maker, you can programme the time when you want your
coffee-maker to turn off after it has been used.
The water in each area has a certain amount of lime that af-
fects the life of the coffee-maker. You can check the hardness
of the water you use and programme your coffee-maker to
tell you when the lime scale should be removed from the ap-
pliance. You can also select the contrast level of the screen
and whether or not you want the coffee-maker to beep to tell
you when the coffee or the steam is ready.
The following is a detailed explanation of how to use the pro-
gramming menu:
16