Troubleshooting - Beem Fresh-Aroma-Perfect DUO Bedienungsanleitung

BEEM - Elements of Lifestyle
The following table helps in localising and remedying minor faults. If you cannot resolve the
problem with the steps described, please contact customer service.
Fault
No symbol in the display.
The fuse in the
fuse box blows.
Water runs out of the ap-
pliance.
The coffee runs very
slowly into the jug.
The coffee does not flow
into the thermos jug.
The coffee is too weak.
Grounded coffee does not
fall into the filter compar -
ment.
Strong build-up of steam
whilst brewing coffee.

Troubleshooting

Possible cause
Not plugged in.
No mains power.
Display defective.
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Too much water in the water
tank.
Drip protector blocked.
Appliance is scaled.
The lid of the thermos jug is
not attached.
Too much water in the water
tank.
Grinder shaft blocked.
Appliance severely scaled.
Remedy
Insert the mains plug.
Check the fuse/mains socket.
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Do not overfill the water tank!
Clean drip protector.
Descale the appliance.
Replace the cover.
Only fill in the amount of
water required for the desired
number of cups.
Clean grinder shaft.
Descale the appliance several
times.
EN 25