Ariston HDM 9 IX Handbuch Für Installation, Bedienung Und Wartung Seite 17

17
150 mm (fig. 18), replace the plug.
· Air outlet directed to the right or
left hand side (fig. 4a-b).
- Remove the four screws fastening
the plastic frame, as shown in
fig. 16.
- Fit the ducting spigot R (fig. 19)
and replace the four screws removed
as above.
3 - Fixing the chimney
a) Loosen the screws M fixing the
two parts of the chimney and pull
the inner section I (fig. 20) almost
all the way out. Remove the
protective film P.
b) Rest the lower section of the
chimney in its housing on the top of
the hood canopy. Lower the ducting
fan unit until it reaches the wall
bracket S and fix it using the screw
H provided (fig. 21). Fit the cover D
(provided) on the wall bracket S (fig. 22).
c) Fix the chimney A to the hood canopy C using the four screws
provided (fig. 23).
d) Insert the transparent seal Q (provided), so as to eliminate any
play between the two parts of the chimney (fig. 24). Lock the
screws M.
e) Remove the support rod B.
E
E
A08_23
- Remove the plug
from the upper part
of the ducting fan
unit (fig. 17), as it is
not possible to insert
the flange F with the
plug in place.
- Fit the
20
flange F
Ø120 or
I
M
A08_20
21
S
E
E
23
18
19
P
A08_21
22
24
17
R
S
Q
Q
A08_24
H
D
A08_22