R82 Gazelle PS Bedienungsanleitung Seite 12

A
EN
B
Knee support
As standard, the Gazelle PS is delivered with knee
supports mounted to be used by front-standing
children. Turn around the knee supports, to be
able to use it for backstanding children:
1. Loosen the handle (A) to remove the foot
supports.
2. Loosen the handle (B) to remove the
complete knee support unit.
3. Mount the complete knee support unit
on the opposite side and fasten with the
handle.
4. Turn the fitting for the knee support 180o,
by loosening the screws (C) and (D).
5. Loosen the screw (E) and turn around the
knee support, for backstanding children.
Adjust the knee support with the enclosed 6 mm
Allen key. Loosen the screws (C) and (D) and the
knee supports are depthadjustable. By loosening
the screw (E) the knee supports adjust in width
and angles. Use the handle (B) to adjust the
height of the complete knee support unit.
C
Angling of lower leg
Mount the bar for the lower leg angling on the
abduction bar, as follows:
1. Loosen the handle (A) to remove the
support.
2. Loosen the Allen screw (B) to remove the
knee supports.
3. Mount the knee support on the bar for the
lower leg angling and tighten the handle (A).
4. Mount the foot support on the bar for the
lower leg angling.
Adjust the hight of the lower leg angling by
turning the handle (B) and adjust the angling by
turning the handle (C). To adjust the foot support
see page 16.
A
B
D
12
C
E
support.R82.org