Getting Started: Seh Utn Manager - Seh Inu-100 Schnellinstallationsanleitung

 Getting Started: SEH UTN Manager
After the SEH UTN Manager is started, the network will be
scanned for connected INU servers. The network range to be
scanned is freely definable.
All INU servers found will be shown in the 'network list'
together with the connected USB devices. The required INU
servers will be selected and added to the 'selection list' . The
INU servers listed in the selection list and the connected USB
devices can then be used by the user.
This chapter describes the first steps with the program.
• 'Starting the SEH UTN Manager' 6
• 'Assigning an IP Address to the INU Server' 7
• 'Adding the INU Server to the Selection List' 8
• 'Connecting the USB Device to the Client' 9
Detailed information on how to use the SEH UTN Manager
can be found in the Online Help. To start the Online Help,
select Help – Online Help from the menu bar.
Quick Installation Guide [en] 5