Step 2: Connect The Display To Your Computer; Step 3: Connect The Power Cord - Sony SDM-series Bedienungsanleitung

x When using VESA Stand
You can attach a VESA stand in other brands by removing the
supplied stand attached to the display.
Step 2: Connect the display to your
computer
Turn off the display and computer then tilt the display up before
connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• Check the alignment of the HD15 connector to prevent bending the pins
of the video signal cable connector.
x Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog
RGB), connect the computer to the display's HD 15 input
connector (analog RGB).
to the computer's HD15 output
connector (analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
x Connect a computer equipped with a DVI
Screws
compatible with
VESA stand (4)
100 mm × 100 mm
to the computer's DVI output
connector (digital RGB)

Step 3: Connect the power cord

With the display and computer switched off, first connect the
power cord to the display, then connect it to a power outlet.
to the HD 15
input connector
(analog RGB)
7
(GB)
output connector (digital RGB)
(SDM-S76D/SDM-S96D/SDM-V76D/SDM-
V96D/SDM-S76F/SDM-S96F only)
Using the supplied DVI-D video signal cable (digital RGB),
connect the computer to the display's DVI-D input connector
(digital RGB).
DVI-D video signal
cable (digital RGB)
(supplied)
to a power outlet
power cord (supplied)
to the DVI-D
input connector
(digital RGB)
to AC IN