Identifying Parts And Controls - Sony SDM-series Bedienungsanleitung

Identifying parts and controls

See the pages in parentheses for further details.
The illustration only shows one of all the models that are available
for this display.
Front of the display
Rear of the display
6 7 8
1 1 (Power) switch and 1 (power) indicator
2 MENU button (pages 10, 11)
MENU
3 m/M buttons (page 11)
4 OK button (page 11)
INPUT
OK
ECO 5 ECO button (page 16)
6 AC IN connector (page 7)
7 DVI-D input connector (digital RGB) for INPUT1
8 HD15 input connector (analog RGB) (page 7)
0
9 Cable holder (page 8) (SDM-S76F/SDM-S96F only)
9
0 Security Lock Hole
5
(GB)
(pages 8, 16)
This switch turns the display on. To turn the display off, press
this switch again.
Press to turn the display on or off.
This button displays or closes the main menu.
You can also switch on the DDC/CI function by keeping this
button pressed for more than 8 seconds.
These buttons function as the m/M buttons when selecting
the menu items and making adjustments.
This button selects the item or executes the settings in the
menu.
INPUT button (page 9) (SDM-S76D/SDM-S96D/SDM-
V76D/SDM-V96D/SDM-S76F/SDM-S96F only)
This button switches the video input signal between INPUT1
and INPUT2 when two computers are connected to the
display.
This button is used to reduce the power consumption.
Connect the power cord (supplied).
(page 7) (SDM-S76D/SDM-S96D/SDM-V76D/SDM-
V96D/SDM-S76F/SDM-S96F only)
This connector inputs digital RGB video signals that comply
with DVI Rev.1.0.
This connector inputs analog RGB video signals (0.7 Vp-p,
positive) and SYNC signals.
This part secures cables and cords to the display.
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.