Technical Features; Power Saving Function; Reducing The Power Consumption (Eco Mode) - Sony SDM-series Bedienungsanleitung

x Locking the menus and controls
You can lock the control of buttons to prevent accidental
adjustments or resetting.
1
Press the m/M buttons to select
and press the OK button.
The MENU LOCK menu appears on the screen.
2
Press the m/M buttons to select ON or OFF and
press the OK button.
• ON: Only the 1 (power) switch will operate. If you
attempt any other operation, the
icon appears on the screen.
• OFF:Set (MENU LOCK) to OFF. If you set the
(MENU LOCK) item to ON, only this menu item can
be selected.

Technical Features

(MENU LOCK)

Power saving function

This display meets the power-saving guidelines set by VESA,
E
NERGY
computer or video graphics board that is DPMS (Display Power
Management Standard) for Analog input/DMPM (DVI Digital
(MENU LOCK) Monitor Power Management) for Digital input compliant, the
display will automatically reduce power consumption as shown
below.
Power mode
normal
operation
active off*
(deep sleep)**
power off
* When your computer enters the "active off" mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 5 seconds,
the display enters the power saving mode.
** "deep sleep" is the power saving mode defined by the Environmental
Protection Agency.
Reducing the power consumption
(ECO mode)
If you set the ECO mode to LOW by pressing the ECO button on
the front of the display, the backlight level is reduced and the
power consumption is reduced, too.
Press the ECO button several times until LOW appears
LOW appears on the screen and the backlight level is reduced.
LOW automatically disappears after about 5 seconds.
16
(GB)
S
TAR, and NUTEK. If the display is connected to a
Power consumption
38W(max.)
(SDM-S76A/SDM-S76D/
SDM-V76D/SDM-S76F)
44W(max.)
(SDM-S96A/SDM-S96D/
SDM-V96D/SDM-S96F)
1.0W(max.)
1.0W(max.)
ECO
,
:
E C O L OW
(power)
1
indicator
green
orange
off
.