Yamaha R-N602 Bedienungsanleitung Seite 10

Controls and functions
PHONES SPEAKERS
A B
5V
D E
D PHONES jack
Outputs audio to your headphones for private listening.
E SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed.
F USB jack
For connecting a USB storage device (p. 37) or an iPod
(p. 39).
G INPUT selector
Selects the input source you want to listen to.
H BASS +/– control
Increases or decreases the low frequency response. The
center position produces a flat response (p. 22).
I TREBLE +/– control
Increases or decreases the high frequency response. The
center position produces a flat response (p. 22).
J BALANCE control
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (p. 22).
6
En
DIMMER DISPLAY MODE
INPUT BASS
1A
F G H
MEMORY CLEAR BAND PRESET TUNING
BALANCE LOUDNESS
TREBLE
FLAT
L R
I J K
K LOUDNESS control
Retains a full tonal range at any volume level to
compensate for the human ears' loss of sensitivity to high
and low-frequency ranges at a low volume level (p. 22).
L SELECT/ENTER (jog dial)
Turn the dial to select a numeric value or setting, and press
the dial to confirm.
M RETURN
Returns to the previous indication of the front display.
CONNECT
Use to control the unit using the dedicated MusicCast
CONTROLLER app for mobile devices. See MusicCast
Setup Guide for details.
N VOLUME control
Increases or decreases the sound output level.
PURE DIRECT
VOLUME
SELECT
PUSH - ENTER
-30dB
RETURN
CONNECT
L M N