Using The Wps Push Button Configuration - Yamaha R-N602 Bedienungsanleitung

When the sharing process finishes, the unit is
automatically connected to the selected network
(access point).
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 20).
■ Sharing the iOS device setting using a
USB cable
If you select "USB Cable" as the connection method,
follow the procedure below to share the iOS device setting
with the unit.
1
Connect the iOS device to the USB jack, and
disable the screen lock on the iOS device.
This unit (front)
DIMMER DISPLAY MODE
INPUT BASS
PHONES SPEAKERS
A B
5V 1A
2
Press ENTER.
3
Tap "Allow" in the message appeared on the
iOS device.
When the connection process finishes, "Completed"
appears on the front display.
When the setting finishes, verify whether the unit is
connected to a wireless network (p. 20).
4
To exit from the menu, press SETUP.
Using the WPS push button
configuration
You can easily set up a wireless connection with one push
of the WPS button.
Note
This configuration does not work if the security method of your
wireless router (access point) is WEP. In this case, use other
connection method.
MEMORY
Cursor keys B / C
ENTER
HOME
SETUP
SETUP
NOW PLAYING
MEMORY CLEAR
TREBLE
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
1
Press A to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (B / C) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
4
Use the cursor keys (B / C) to select
"Connection" and press ENTER.
5
Use the cursor keys (B / C) to select
"Wireless" and press ENTER.
WIRELESS
WPS
6
Press ENTER twice.
"Connecting" appears on the front display.
7
Push the WPS button on the wireless router
(access point).
When the connection process finishes, "Completed"
appears on the front display. When the setting
finishes, verify whether the unit is connected to a
wireless network (p. 20).
If "Not connected" appears, repeat from Step 1 or try
another connection method.
8
To exit from the menu, press SETUP.
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a
wireless home network.
Connecting to network
17
En