Accepting Calls; Call Forwarding - Snom 720 Schnellstartanleitung

E
N snom 720 Quick Start Guide
G
L
Configuring & modifying identities
I
Web interface > Identity 1-12 > Login. See "Initializing and registering the phone"
S
H
on page 9 for required and optional information.
Using the phone
Making calls
• Enter the number on the alphanumeric keypad and pick up the handset or
• pick up the handset, enter the number,
• , enter the number,
Speed Dial
Type the speed dial number or character on the alphanumeric keypad and press P.
Setting the speed dial numbers: Web interface > Speed Dial. Type each phone
number with any necessary area code and/or country code etc. without spaces,
hyphens, etc. into one of the textboxes of the table. Do not add any names or other
data. Example: To enter (911) 555-1234, type 9115551234.
Emergency Numbers
These numbers can be called even when the keyboard is locked. The numbers "911",
"112", "110", and "999" are preset.
Change/add numbers: Web interface > Preferences > Lock Keyboard > Emergency
Numbers (space separated). Type each number without spaces, hyphens, etc. between
the digits, separate the individual numbers with one empty space between them.
Example: 911 112 110 999.

Accepting calls

• With the handset: Pick up the handset
• With a headset: Press or blinking line key
• With the speakerphone: Press
Putting calls on hold
Press . The LED starts to blink slowly. Press
again to resume the call. With more than one call on hold,
select call with / , then press
Conference
(up to 5 parties, including you)
1. Your phone number: 157. Put first party (153) on hold.
2. Call second party (154). Put on hold.
Call third party (172). Press
conference.
14
or
to resume the call.
to start
3. Press or to stop conference and put parties on hold.
Talking to one of the parties alone: Press the blinking line key or
select line with / and .
4. Resume conference: Press .
Call transfer
Attended transfer
Put the call on hold > Dial the number that you wish to transfer the call to > If
the third party wishes to accept the call, press
Blind transfer
With call ringing or on the line: Press
transferred to > press .

Call forwarding

1. All incoming calls.
• Turning on: > Target when forwarding > enter number >
• Turning off:
2. When busy.
• Turning on: > 2 Call Features > 1 Call Forwarding > 2 When busy >
2 Target: enter number >
Press briefly to return to previous screen or for 2 seconds to return
to idle screen
• Turning off: > 2 Call Features > 1 Call Forwarding > 2 When busy > 1
Activate: Press 1
screen or for 2 seconds to return to idle screen
3. When call is not picked up.
• Turning on: > 2 Call Features > 1 Call Forwarding > 3 On Timeout > 2
Target: enter number >
> 1 Activate: Press
previous screen or for 2 seconds to return to idle screen
• Turning off: > 2 Call Features > 1 Call Forwarding > 3 On Timeout > 1
Activate: Press
1 
screen or for 2 seconds to return to idle screen
Forwarding all calls: Forwarding when busy or after timeout:
snom 720 Quick Start Guide
and .
> dial the phone number the call is to be
.
> 1 Activate: Press 1

> Press briefly to return to previous

> 3 Time: enter number of seconds >
> Press briefly to return to
1 
> Press briefly to return to previous
E
N
G
L
I
S
H
>
15