Philips HQT562 Bedienungsanleitung Seite 6

ENGLISH
8
C
C
1
2
Environment
To protect the environment, this appliance has
been equipped with a nickel-metal-hydride
battery which contains less than 0.01% cadmium.
Remove the rechargeable battery when you
discard the appliance.
Do not throw the battery away with the normal
household waste but hand it in at an official
collection point.
You can also take the appliance to a Philips
service centre, where the staff will be happy to
help you remove the battery and dispose of it in
an environmentally safe way.
1 Disconnect the appliance from the mains
and let the appliance run until the motor
stops.
2 Undo the screw of the base plate on the
rear side of the appliance.
3 Pull the battery holder approximately
4 cm. out of the appliance.
4 Insert the screwdriver into the small slot
in the printed circuit board marked with
an arrow. Push the screwdriver down until
parts of the printed circuit board break
off.