Technical Data - Kindermann QuickSelect 3.0 Installationsanleitung Und Bedienungsanleitung

Scrensaver:
If a Quickselect unit is activated without any active source being connected (by pressing the internal or
external Show-Me button), the screensaver of the internal VGA-to-HDMI scaler appears. The screensaver
shows the current installed firmware version of the individual Quickselect module.
If required in specific cases the screensaver can be deactivated (or re-activated) by using the RS232
"Send" text field of the GUI software. Click "Clear" to clear the text field and type in the following
command:
Screensaver Off:
Screensaver On:
Note: After re-activating the screensaver which has been deactivated before, the screensaver only
becomes active if the video input source is disconnected and reconnected or if the Quickselect unit
is power cycled.

9. Technical data

Input
Video/Audio
interfaces
HDBaseT
Control
I/O inputs
RS232
General
Resolution range
Input level
EDID/DDC
HDCP
Mains unit
Dimensions
30
7B 7B 1A 00 02 FF 00 0B 7D 7D
7B 7B 1A 00 02 FF 01 0C 7D 7D
2 x HDMI (HDMI 1.4 with
HDCP), VGA, audio (3.5 mm)
HDBaseT-In
One contact input (3-pin.
Phoenix connector) each for:
- HDMI1, HDMI2 and VGA
- ShowMe-function
3-pin. Phoenix connector for
device control
HDMI: 1080P/1080i/720P/57
6P/480P/576i/480i
DP & VGA:
800x600/1024x768/1280
x 800/1280x1024/1400
x1050/1600 x1200/1920
x1080/1920 x1200
0,5 – 1,0 Vp-p (DDC: 1,2Vp-p)
Supports Extended Display Identification Data (EDID) and Display Data Channel
(DDC) data via DVI and HDMI Standards, EDID and DDC signals
Compatible with high-bandwidth Digital Content Protection (HDCP).
100 VAC ~ 240 VAC, 50/60 Hz
secondary 12 V DC, 3A
Transmitter:
223 x 26 x 100 mm (WxHxD)
Output
Video/Audio HDMI (HDMI 1.4 with HDCP),
interfaces audio (3.5 mm)
HDBaseT HDBaseT-Out
USB socket Type-A, max. 2A
One output (3-pin. Phoenix
connector) each with LED
I/O outputs driver for:
- HDMI1, HDMI2 and VGA
- ShowMe-function
Operating 0°C up to 35°C
temperature
10% up to 90%,
Humidity
non-condensing
Storage
-20°C up to 70°C
temperature
Audio output DTS-HD, Dolby HD
Energy 12 W max.
consumption (without charging function)
approx. 0.8 kg
Weight
(without mains unit)