1. Safety instructions
•
Please read the instructions with care and keep them
•
The QuickSelect 3.0 must only be operated with safety extra-low voltage
•
The device must only be stored and used in dry environments
•
Always install the device with the label up for thermal reasons
•
Ensure sufficient ventilation of the devices
•
Please observe the safety notes of the devices to be connected
2. Connections on the front and rear
Device address:
Dial switch
00 to 99
(99 = Automatic)
Rear side
Front side
USB socket
for charging
Smartphone etc.
(max. 5V/2A)
and for firmware
updates
3. Scope of delivery
•
1 x Kindermann QuickSelect 3.0
•
1 x mains unit 100-240 V~ / 12 V DC, 3 A, with screwable extra-low voltage connection
•
2 x mounting bracket for under-desk mounting of the device
•
4 x device feet
•
4 x screw/plug connection terminal, 3-pin; 1 x 2-pin for mains unit
•
1 x screw/plug connection terminal, 3-pin; with short-circuit (Quick-Setup jumper)
•
1 x quick setup manual
The free configuration software for download can be found on our dealer portal (for resellers only):
http://shop.kindermann.de/erp/webshop/navigationPath/7447000400.html
18
ShowMe connections
for external buttons
with status-LED feedback
RS232-
connection
2x HDMI
input
VGA + audio
input
HDMI
output
Audio
output
Ethernet
ShowMe
10/100Mbit
button
Mains unit
DC 12V 3A
HDBaseT
input
link in
HDBaseT
output
link out