Kindermann QuickSelect 3.0 Installationsanleitung Und Bedienungsanleitung Seite 26

VGA Timing characteristics
VGA signals: Available resolutions and refresh rates
Native/preferred timing
Modeline
Detailed timing #1
Modeline
Detailed timing #2
Modeline
Standard timings supported
VGA to HDMI converter:
The integrated VGA to HDMI Scaler converts analogue video and audio signals into
an HDMI signal.
26
1920x1080p at 60Hz (16:9)
„1920x1080" 148,500 1920 2008 2052 2200 1080
1081 1085 1125 +hsync +vsync
1366x768p at 60Hz
„1366x768" 85,500 1366 1436 1579 1792 768 771
774 798 +hsync +vsync
1920x1200p at 60Hz (16:10)
„1920x1200" 154,000 1920 1968 2000 2080 1200
1203 1209 1235 +hsync -vsync
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 960p at 75Hz - VESA STD
1600 x 1200p at 60Hz - VESA STD
1280 x 800p at 60Hz - VESA STD
1920 x 1080p at 60Hz - VESA STD
1400 x 1050p at 75Hz - VESA STD
To achieve the highest possible quality from the VGA source signal,
the resolution of the video signal fed-in via VGA can be adjusted on
the output side. On the left, for all devices that were found under
‚Auto search'; on the right only for the selected device (framed red).
For best image quality, the native (physical) resolution of the output
device should be set.
If this value is set to Auto, the following assignments are used: