Basic Operation; Power On And Off Modes - NEC LCD3000 Bedienerhandbuch

Basic Operation

Power ON and OFF Modes

The LCD monitor power indicator will turn green while powered on, or red when in off mode. The monitor can be powered on
or off using the following three options:
Main Power Switch
01_English
INPUT MUTE
Power Switch
REMOTE CONTROLLER RU-M104
16
1. Pressing the power button.
Note: Before operating the remote control, be sure to
turn on the Main Power Switch on LCD monitor.
2. Using the remote control.
Note: Before operating the remote control, be sure to
turn on the Main Power Switch on the LCD
monitor.
3. Pressing the Main Power Switch.
Note: When the Main Power Switch is used to power off
the LCD, the remote control and the power switch
will not activate the on mode. Be sure to turn the
Main Power Switch to the on mode before using
these two options.
English-16
15/10/02, 12:08 pm