CIAT Magister 2 CW 12 Montage-Betriebs-Und Wartungs-Anweisung Seite 52

Replacing the filter elements on sizes CW 12 to 90
When performing maintenance, it is important to avoid releasing and spreading the dust that has accumulated in the
filter.
Turn off the unit.
▪ Filters (sizes CW 12 to 90)
Access the filters by opening the middle panels (Fig. 1).
Remove the spring from the runner. (Detail A)
Remove the filters by moving the runner aside. (fig.2)
Replace the used filters by new filters. Take care to note the direction of air flow indicated on the new filters.
Always make sure that the filter elements are properly positioned before compressing them or turning the unit back on.
DETAIL A
FILTERS
GB-21
Fig. 1
DETAIL A
Fig. 2
FILTERS
RUNNER