Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OVERVIEW
Features
LED DMX mirror ball effect
• Half ball with 55 lenses
• Equipped with 1 x 5 W LED, white
• Particularly bright illuminating power of the LED
• Long LED life
• Up to 20 rotations per minute
• Sound controlled via built-in microphone
• Microphone-sensitivity adjustable via rotary-control
• Strobe effect
• Auto mode
• Internal program
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Innumerable uses
• When smoke is used, this effect becomes especially attractive
• Ideal for bands, stages or solo entertainers
• Hanging or standing installation possible
• Mounting bracket for installation on a trussing system included
• Ready for connection with power cord and safety-plug
• DIP-switches for adjusting the DMX-starting, stand alone operation with Master-/Slave-function and speed
are adjustable via dip switches
• DMX-512 control via regular DMX-controller
• Advantages of LED-technology: long life of the LEDs, low power consumption, minimal heat emission,
defacto maintenance free with brilliant light radiation
INSTALLATION
Rigging
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
The device can be installed on the ground or on the wall or ceiling.
Hanging installation
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
DANGER OF FIRE!
17/23
00047163.DOC, Version 2.0
Werbung
Inhaltsverzeichnis
