Resetting To Default Settings - wtw Oxi 1970i Bedienungsanleitung

Resetting to default settings

Measurement
parameters
Configuration
parameters
pH S mV
I i n i
O %
mg/l
S/
m
Sal
1/
cm
Time Baud 0 9 n o
C
°
Day.Month No.
%
Year Ident
26
Resetting to default settings
You can reset the measurement parameters and the configuration to the
delivery status separately from one another (initialization).
The following measurement parameters can be reset to the delivery status:
Oxygen (O InI)
2
Measuring mode
AutoRange automatic switchover of
the measurement range
Relative slope
Correction factor of the relative
slope
Salinity input
Salinity correction
The following configuration parameters (InI) can be reset to the delivery
status:
Baud rate
Interval 1
(automatically saved)
Interval 2
(for data transmission, Oxi 340i
only)
Reset procedure:
Press <CAL> while pressing the <RUN/ENTER> key.
/ pH
To reset the measurement parameters, use <▲> <▼> to select YES and
cm
confirm with <RUN/ENTER>, or
Sal
/ K
TP
Continue to the configuration parameters without resetting (InI) with the
<RUN/ENTER> key.
After the InI configuration parameters, the instrument switches to the last
active measurement mode.
D. O. concentration
On (YES)
1.00
1.000
0.0
Off
4800
OFF
OFF
Oxi 1970i