Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SYSTEM SETUP
LANGUAGE
TOUCH CALIBRATE
VER
DEFAULT SET
Change the LED colors
Tap the CC.LED icon in the Mode Menu interface to pop up the LED color changing interface. Tap the direction icons
to select your desired color mode:
AUTO (the 5 colors will be changing automatically in certain order), RED, GREEN, BLUE, PURPLE, ORANGE (backlight
in single color mode) or CUSTOM (select this mode then tap the direction icons to adjust the color of each color bar
(R,G,B):
BAND BUTTON
In RADIO mode, press the BAND button on the remote contro or tap the BAND icon in the radio interface to select your
desired radio band of FM1, FM2, FM3, AM1 and Am2.
TUNE/SEEK UP/DOWN BUTTONS
Press and hold
/
on the remote control to up/down for a available station from the current frequency. Briefly
press the arrow buttons down with step by step for your current frequency.
APS BUTTON
•
When pressing and holding the APS button or the SCAN icon, the radio searches from the lowest frequency and
checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the
corresponding preset number memory bank.
•
The AS operation is implemented in the each bank of the selected band. When the AS operation is finished, it will
scan each preset station for 5 seconds in FM or AM band from M1 as briefly pressing APS button. After finishing a
circle of scanning, it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM
in all)
•
When briefly pressing the APS button or the icon, the radio will scan each preset station for 5 seconds in FM or AM
band from M1. After finishing a circle of scanning, it will resume broadcasting on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time; In AM band, AM1, AM2 is checked one at a time.
Change display and menu language
Gently press on the cross in the center, and on
each cross as displayed in different areas of the
screen.
When "Adjust Finish" is displayed the calibration
is successful.
Show the current firmware version number
Set to factory default.
Radio Operation
26
Werbung
Inhaltsverzeichnis
