Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAVE AND RECALL PRESET STATIONS [1-6]
To save the current frequency on the current band, press and hold any one of the six number buttons (1-6).
To recall the memory station on the current band, press one of the Number buttons [1-6].
STEREO/MONO: Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band.
LOC
•
When the signal of the distance radio station are very weak and the receiving effect is bad during tuning, check the
screen whether the icon LOC is highlighted. If it's highlighted then press this button to turn off the LOC function,
and tune again for the distance radio station;
•
When the signals from the local radio stations are too strong, this could lead to interference. press this button to
turn on the LOC function, and the LOC icon will be highlighted, then tune for the local station required.
PTY (PROGRAM TYPE)
Press the PTY button briefly to select one of the following mode: PTY MUSIC - PTY SPEECH - PTY OFF.
When PTY group is on, press the + / - button on the remote control to select one of PTY programs:
NEWS - AFFAIRS - INFO - SPORT - EDUCATE - DRAMA - CULTURE - SCIENCE - VARIED - WEATHER - FINANCE
CHILDREN - SOCIAL - RELIGION - PHONE IN - TRAVEL - LEISURE - COUNTRY - NATION M - OLDIES - FOLK
After selecting one of the PTY programs, it will display SEEK PTY and automatically search for the station of the PTY
program. If the station of the PTY program does not exist, it will display PTY NONE and then return back to the normal
station.
AF [ALTERNATIVE FREQUENCIES]
When pressing the AF button briefly, the AF switching mode is selected and the state of the AF switching mode is
displayed by AF segment on LCD.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of
checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong sta-
tion to a few seconds for the weak station. Every time that a new AF is stronger than the current station, it switches
over to that frequency for very short time, and the NEW FREQUENCY is displayed for 1-2 second. Because the mute
time of the AF switching or the checking time is very short, it is almost inaudible in case of normal program. (When
AF flash on LCD, it will search for the stronger RDS station. If AF and TP flash on LCD, it can only search for the traffic
announcement station).
In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save the RDS program.
TA [TRAFFIC ANNOUNCEMENT]
Press the TA button to turn on TA search mode. When traffic announcement is transmitted:
•
If the unit is in media play mode, it will switch to radio mode temporarily.
•
Temporarily switch over to a station which is broadcasting traffic announcement , and TA, TP will be displayed on
LCD
•
TA interruption function:
The current traffic announcement is cancelled by pressing TA button shortly.
•
When TA is on, SEEK, (SCAN), AUTO MEMORY function can be received or saved only when traffic program
identification code has been received.
27
Werbung
Inhaltsverzeichnis
