Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.
•
Use the clip end of the Ground Wire provided by manufacturer to connect Mounting Screw, using the other end of
the Ground Wire to connect the negative pole of the power source. Otherwise, the video on screen maybe flashes.
•
Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
•
Before finally install the unit, connect the wiring and make sure it is all connected properly, and the unit & the
system work properly.
•
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause
malfunctions.
•
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
•
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop,
like an emergency stop or when excessive brakes is applied suddenly.
•
If installed angle from flat horizontal position up to 30° , the unit might not give its optimum performance.
Connecting the parking brake::
Fixing Screw
A
C
Radio antenna
B
D
Installation
Wiring socket 1
Wiring socket 2
22
Werbung
Inhaltsverzeichnis
