Installation Of High Capacity Floating Washing Machines (Group D); Removal Of Packaging - Fagor LA-11 Allgemeine Hinweise Zur Installation

8. INSTALLATION OF HIGH CAPACITY FLOATING WASHING MACHINES

8.1. Removal of packaging

.
WARNING! Check that this has been carried out before starting the machine otherwise there is a risk of
damaging components of the machine.
Remove the cover and wooden side protectors
together with the plastic protector covering the
appliance.
After unpacking the washing machine, the
pieces that secure the floating part and the
chassis during
removed. In order to do this, the side panels
and skirting must be removed to access the
fastening elements. They are easily seen as
they are red.
To remove the wooden base, remove the screws fastening the wood. Lift the
machine using an elevation trolley.
When raised, change the position of the legs so that the
machine rests on the legs when lowered back to the ground.
Lower the machine
Remove the wooden packaging in order to be able to fit the
machine in place. The washing machine should be level with a
space left for maintenance work. 0.5 m on the side and 1 m at
the rear.
(GROUP D)
transportation should
8
be
ENGLISH