Mounting The Unit In The Dashboard; Fuse Replacement; Detaching And Attaching The Front Panel - Sony DSX-A410BT Bedienungsanleitung

Mounting the unit in the dashboard

Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.

2
Mount the unit onto the bracket , then
attach the protection collar .

Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 6).
182 mm (7 1 /
1
53 mm (2 / in)
8
Catch

Resetting the unit
For details, see "Resetting the Unit" (page 7).
3 /
32

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
in)
4
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Fuse (10 A)
35
GB