Aux In Operation - auna 10032059 Bedienungsanleitung

on the display. It will play all files repeatedly.
REPEAT OFF: Press the PLAY MODE button once more again, the repeat
function will turn off.
NOTE:
• The unit can only play MP3 file format in USB operation.
• If your USB device is loaded with MP3's but the display keeps showing
"NO" on the display, the format of your USB device might not be
compatible with the unit.
• This unit supports USB versions 1.1 and 2.0.
• The unit can support USB devices with up to 32GB of memory.
• The unit may not be compatible with all USB devices and memory
cards, this is not an indication of a problem with the unit.

AUX IN OPERATION

This CD features an AUX-IN jack for connecting your iPod, MP3 player or
other digital music player.
1. C onnect the headphone jack of your external device to the AUX IN
jack located on the back of this CD player (The connection cable is not
included).
2. Turn on the CD player and slide the FUNCTION SWITCH to AUX/BT
position, unit will enter the AUX function mode once an external device
is plugged into the AUX IN jack.
3. Start to play your iPod, MP3 player or other external audio device.
4. Slowly adjust both volume controls on your CD player and the external
device.
5. T urn off your iPod, MP3 player and etc. when finish listening. Turn the CD
player off and unplug the AUX IN jack.
Remark: Once the AUX IN jack is plugged, the BT/AUX player will
automatically enter the AUX mode when the FUNCTION SWITCH is in BT/
AUX mode. Remember to disconnect the cable from the unit after use in
order to be able to listen to the BT mode again.
EN
39