Bt Operation - auna 10032059 Bedienungsanleitung

EN
40

BT OPERATION

Press Slide the "FUNCTION" switch to AUX/BT position. to turn ON the unit
and follow the directions below to connect via BT. (disconnect the AUX in
cable).
PAIRING (Linking) a BT ENABLED cell phone OR OTHER BT ENABLED
DEVICE to the Roadie
If the Roadie has never been paired with a BT device before. You need to
follow the pairing instructions below to link the Roadie with your BT device.
1. Press Slide the "FUNCTION" switch to AUX/BT positiont.
2. Message "BT LINK" appears in display and flashing.
3. If the Roadie has never been paired with a BT device before or cannot
find the last paired device, the flashing "BT LINK" on LCD will indicate
the Roadie is in search mode. You need to follow the pairing instructions
below to link the Roadie with your BT device.
• Turn on the BT function of your BT device and enable the search or scan
function to find the Roadie
• Select " Roadie " from the device list when it appears on your device
screen. If required, enter the pass code "0000" to pair (link) the Roadie
with your device.
4. After successfully pairing (linking), display will change to show "bt"
steadily, the BT icon also will show in display. You can begin playing
music from your BT device wirelessly to the speaker.
5. After selecting your favorite song, press PLAY/PAUSE Button on the unit
l to play or pause the song.
6. Adjust the VOLUME CONTROL to the desired volume level.
7. P ress SKIP-/+ Button to skip to previous or next song.
8. If you want to pair the Roadie with another BT enabled device, press and
hold the PAIR Button for 3 seconds or turn off the BT function of device
currently paired with Roadie then repeat step 3 above.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other BT
enabled devices for BT operation since it may vary from model to model.
2. I f your BT enabled device does not support A2DP profile, it will not play
the music through the speaker, even if paired (linked).
3. I f you are pairing (linking) your computer to the unit using BT, you may
need to set the speaker as your computer's default sound device.