Aux In Operation; Mute / Eq Operation; Phones Operation - auna Elton Bedienungsanleitung

EN
40
Delete all tracks
1. During the USB stop mode, press and hold the DELETE button for few
seconds on the remote control, 'DEL-A' will show on the display
2. Press DELETE button again and the display will show "Yes" and flashing
⏭
"No", press to choose "Yes".
3. Press DELETE button again to confirm. All files in the USB will be
deleted.

AUX IN OPERATION

Press MODE button to select the AUX mode. Insert the audio cable (not
included) into the matching 'AUX IN' socket of the unit.
Start the playback of the connected device and you can hear the sound in
the unit.

MUTE / EQ OPERATION

During playing mode, press MUTE button on the remote control one time,
the sound will not be heard from the speakers and 'MUTE' will show on the
display; press MUTE button or
function and the sound can be heard again from the speakers.
During playing mode, press EQ/LIGHT button to choose the different sound
effect from "POP/ CLASSIC /ROCK/ JAZZ / FLAT", you can choose the
desired one.
Note: To leave the EQ mode, press and choose 'FLAT'.

PHONES OPERATION

During usual operation insert the earphone's cable (not included) into
the matching 'PHONES' socket of the unit. Now you can hear the sound
exported to your earphones.
Note: Adjust the volume lever lower during the PHONES operation. To
prevent possible hearing damage, do not listen at high volume levels for
long periods.
/ or EQ/LIGHT button to cancel mute