mixars QUATTRO Bedienungsanleitung Seite 4

B. Controls and functions
Rear
1. Power On/Off switch
Turns the power of the unit On and Off.
2. AC In
Connect the power cord here.
3. FX Return input, TRS
FX Return input for onboard FX.
4. FX Send output, TRS
FX Send output for the onboard FX.
5. Output Level Trim knob
Adjust the output level from 0dB to -6dB.
6. Secondary Master output, RCA
Secondary RCA Master output (Unbal.), controlled via the «Master» knob
7. Record output
Additional RCA Record output (Unbal.)
8. Secondary Line inputs
Line signal dedicated secondary input for each channel.
9. Main Phono/Line inputs (Serato Inputs)
Main Phono / Line Inputs for each channel.
Use the dedicated «Phono / Line» button nearby
for selecting the right setting depending on the equipment used (Phono or Line sources).
Use this inputs for Serato timecode Vinyls/ CDs in order to use with Serato DJ.
10. Master output, Balanced XLR
Main Balanced XLR output, controlled via the «Master» knob
11. Secondary Mic input
TRS Microphone input, controlled via the «MIC/AUX» knob.
12. Booth Output, TRS
Secondary TRS output (Bal.), controlled via the «Booth» knob
13. Mic input
XLR / TRS Combo Microphone input, controlled via the «MIC/AUX» knob
EN 3