Firmware Update; Specifications - mixars QUATTRO Bedienungsanleitung

E. System Utility Menu
To enter System Utility Menu, press and hold the 2 SHIFT buttons when the Quattro is working. The
menu will be shown on the Display. Use the FX Select Encoder to browse to different option and
press the encoder to select and change the settings:
1. Audio routing
Select between Serato and non-Serato Audio routing
2. Crossfader power
Select between the linear and power crossfader setting. This will also update the selection in
connected Serato DJ software on both USB 1 and USB 2 connection.
3. Firmware Version
Display the firmware version.
4.Exit system utility menu
Press the FX Select Encoder to exit system utility menu.
F. Firmware Update
Mixars will continue improve the product and fix bugs by releasing new firmware for the production.
New firmware and firmware update software tool can be downloaded from Mixars website
(http://www.mixars.com). Firmware update procedure:
1. Download the firmware update tool and latest firmware from Mixars website.
2. Connect the USB able to the computer.
3. Press and hold the FX CUE and TAP button and power on. "FIRMWARE UPDATE" will be shown on
the display and the Quattro is in Firmware update mode.
4. Open the firmware update software and locate the firmware update file.
5. Follow the on-screen instruction to start firmware update and wait for the prompt for update
finish
6. Power cycle the Quattro after firmware update.
G. Specifications
1.
GENERAL SECTION
Power Supply
Dimensions
Consumption
Weight
2.
STANDARD TEST CONDITION
Ambient Temperature
Relative Humidity
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative
humidity.
3.
INPUT/OUTPUT IMPEDANCE & SENSITIVITY: (1KHz,EQ FLAT, MAX. GAIN )
3-1. INPUT IMPEDANCE AND REFERENCE INPUT LEVEL:
LINE:
PHONO:
MIC :
RETURN:
USB
3-2. OUTPUT IMPEDANCE AND REFERENCE OUT LEVEL:
MASTER(XLR):
BOOTH:
MASTER(RCA):
RECORD:
SEND:
PHONE:
AC 100~240V 50Hz/60Hz
320(W) x 362(D) x 107(H) mm
20W
5.35Kg
23 +/- 2 degC
65% +/- 5%
47KΩ /-14dBV (200mV)
47KΩ /-50dBV (3.16mV)
5KΩ/-54dBV (2mV)
47KΩ /-20dBV (100mV)
-12dBFS
600 OHM / 0dBV (1V) ± 2dB (Signal to Signal 600 ohm)
600 OHM / 0dBV (1V) ± 2dB (Signal to Signal 600 ohm)
1K OHM / 0dBV (1V) ± 1dB (load=100K ohm)
1K OHM / -9dBV (355mV) ± 1dB (load=100K ohm)
1K OHM / -14dBV (200mV) ± 1dB (load=100K ohm)
32 OHM / -3dBV (708mV) ± 1dB (load=32 ohm)
EN 10