Leckey Everyday Activity Benutzerhandbuch Seite 37

10.4 Chassis
The Everyday Activity Seat is designed to
fit onto several Chassis options. Size 1 fits
onto a basic and hi-low gas spring chassis.
Size 2 fits onto a basic, hi-low gas spring
and hi-low powered chassis. Size 3 fits onto
a basic and hi-low hydraulic chassis. This
user manual shows the correct and safe use
of the seating system with these chassis
options. The castors on the chassis include
directional locks. To apply the locks push
down on the grey pedal. When the directional
locks are in use the chair will steer with the
back castors.
10.5 Height Adjustment
– Hi-low chassis
You can carry out this adjustment with the
user in the chair. To adjust the height of the
hi-low chassis press the foot lever at the
rear of the chassis whilst holding the push
handle. Once you remove your foot from the
pedal the seat will be fixed at the chosen
height. For safety the height adjustment
pedal on the chassis can be locked by
engaging the locking pin (a) on the right hand
side of the pedal. To unlock pull the pin out
and rotate 90 degrees, the pedal can then
be operated. The locking pin (a) should be
kept in the locked position when you are not
adjusting the chassis.
Before using the foot pedal, pull the pedal
out away from the seat.
Always keep the locking pin engaged when
you are not adjusting the chassis. This
will prevent the foot pedal being operated
accidentally.