Leckey Everyday Activity Benutzerhandbuch Seite 35

10.1 Transferring your child
into and out of the seat
Before transferring the child into the seat
carry out the daily product inspection as
outlined in section 13 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards
to maximise product stability. Make sure
the safety buckle on the chest harness is
released and is out of the way to facilitate
transfer.
If the seat has flip-away chest laterals, first
move these out of the way. Unclip the pelvic
harness in the middle. Lastly if sandals are
fitted open the straps. You are now ready to
transfer or hoist the child into the seat.
Once the child is in the seat, firstly fasten the
pelvic harness using the middle buckle. Then
refasten the sandal straps and any other
harnesses, and reposition the chest laterals.
Always secure the pelvic harness or Pelvic
Cradle first before fastening other buckles
or harnesses. Adjust the harness so the
child cannot slide or creep forward in the
seat.
10.2 Adjusting the pelvic
harness
For side adjustment, open the Camlocks
and either pull the straps to tighten or feed
the straps through to loosen, depending on
fit required (a). To adjust in the centre pull
the D Ring from the velcro and feed strap
through buckle on either strap to loosen the
belt or pull D rings away from the buckle to
tighten the belt (b).
Ensure strap is fed through the triglide as
a safety precaution in case the camlock is
opened accidently.
A
B