Authorized Use - Scheppach HP800S Originalbetriebsanleitung

(risk of electric chock).
• Let the machine cool down before you do any conver-
sion or repair work.
Refilling the fuel
Attention: Risk of explosion. Smoking not allowed.
1 Shut down the motor.
2 Let the motor cool down.
3 Carefully open the tank cap. (Make sure that not fuel
will escape due to overpressure.)
4 Fill in fuel. (Attention: Risk through overflowing.) Im-
mediately remove any spilled fuel with a cloth.
5 Tightly close the tank cap. (The cap can get loose
through the vibration of the machine.)
Operating time
The operation of the vibratory plate can disturb the blood
circulation.
• Use appropriate gloves and make regular pauses.
m Authorized use
The machine meets with current EC machine directives.
• The vibratory plate is only authorized for working on
smaller and medium-sized areas, foundations, terrac-
es, entrances, in the garden, landscaping, and simi-
lar works.
• Before starting work, all safety devices and guards
must be fitted on the machine.
• The machine has been designed for being operated by
one person. The operator is responsible opposite third
persons within the working area.
• All safety instructions and warnings on the machine
must be observed.
• All safety instructions and warning on the machine
must be maintained complete and clearly legible.
• The machine must only be used in technically perfect
condition in accordance with its designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware of
the risks involved in operating the machine. Any func-
tional disorders, especially those affecting the safety,
should therefore be rectified immediately.
• The safety, working and servicing instructions of the
manufacturer, as well as the dimensions given in the
chapter "Technical data", must be observed.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must be
adhered to.
• The machine may only be used, maintained, and op-
erated by persons familiar with it and instructed in its
operation and procedures. Arbitrary alterations to the
machine release the manufacturer from all responsi-
bility for any resulting damages. The machine may
only be used for jobs it has been designed for and as
described in the operating manual.
m
-
-
-
-
-
-
-
-
-
-
-
13