Samsung SMT-3211 Bedienungsanleitung Seite 64

blinks every 0.5 or 1 seconds.
The screen is blank and it is
blinking.
Problems related to Audio
Note
• Problems related to audio signals and their solutions are listed below.
Problems
No sound.
The sound level is too low.
The sound is too high or too low.
Problems related to the Remote Control
Note
• Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do not
respond.
z If you see the "TEST GOOD" message on the screen when you
pressing the MENU button, check the cable connection between
the LCD monitor and the computer to ensure that the connector
is properly connected.
Solutions
z Ensure that the audio cable is firmly connected to both the
audio-in port on your LCD monitor and the audio-out port on
your sound card.
(Refer to the Connecting the LCD monitor
z Check the volume level.
z Check the volume level.
z If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
z Adjusts the Treble and Bass to the appropriate levels.
Solutions
z Check the polarities (+/-) of the batteries.
z Check if the batteries are empty.
z
Check if the power is on.
z Check if the power cord is securely connected.
z
Check if a special fluorescent or neon lamp is on in the vicinity.
3
)