Samsung SMT-3211 Bedienungsanleitung Seite 23

For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.
6. Wall Bracket Installation
Contact a technician for installing the wall bracket.
z
Samsung Electronics is not responsible for any damages to the product or harm to customers when the
z
installation is done by the customer.
This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
z
Components(Sold separately)
Only use the components and accessories shipped with the product.
A Wall-Bracket B Set-Bracket C
How to assemble the Wall Mount Bracket
1
1. Mark the location of hole on the wall.
2. Make over 35mm-depth-hole on the marked location using drill.
3. Fix anchors F on each hole on the wall.
4. Connect wall-bracket A to the wall with wood screws E after fitting
anchors F into the wall-bracket A.
If the bracket is not firmly fixed to the wall, set can fall off.
2 1. Turn the power off and unplug the power cord from the outlet.
2. Place the monitor faced down on a soft cloth or cushion on a table.
3. Attach the set-bracket B onto the rear side of the monitor set and secure the screws C.
Screw: Screw: Wood Screw:
D E
8 EA 3 EA 7 EA
Anchor:
F G Installation Guide
7 EA