Samsung SMT-3211 Bedienungsanleitung Seite 53

4) Custom
Although the values are carefully chosen by our engineers, the pre-configured values may not be
comfortable for your eyes depending on your taste.
If this is the case, Adjusts the brightness and contrast by using the OSD menu.
[The direct button on the remote control is the 'M/B' button.]
Custom
[MENU] [ / ] [ENTER]
By using the on-screen menus, the contrast and brightness can be changed to your personal preference.
1) Contrast
Adjusts the Contrast.
2) Brightness
Adjusts the Brightness.
Note
• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.
Color Tone
[MENU] [ / ] [ENTER]
The color tones can be changed.
1) Cool
3) Normal
4) Warm
5) Custom
(Available in PC, BNC mode only)
Color Control
[MENU] [ / ] [ENTER]
Adjusts the individual R, G, B color controls.
(Available in PC, BNC mode only)
1) Red
2) Green
3) Blue
Note
• If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with
jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse
adjustment and then use Fine again.
(Available in PC, BNC mode only)
1) Coarse
[MENU] [ / ] [ENTER]
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
2) Fine
[MENU] [ / ] [ENTER]
Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after
adjusting the frequency (clock speed).
3) Position
[MENU] [ / ] [ENTER]
[ENTER]
Adjusts the screen location horizontally and vertically.
[ / ] [ENTER] [ENTER]
[ / ] [ENTER] [ / ]
[ / ] [ENTER] [ENTER]
[ / ] [ENTER] [ENTER]
[ / ] [ENTER] [ / ]
[ / ] [ENTER] [ / ]
2
[ / ] / [< / >] [ENTER]
[ENTER]
[< / >] [ENTER]
[< / >] [ENTER]
[ENTER] [< / >] [ENTER]
[ENTER] [< / >] / [ / ]