Connections; Installing The Stand Kit - Samsung SMT-3211 Bedienungsanleitung

Safety Instructions
Introduction

Connections

Installing the Stand KIT

Connecting the LCD
Display
Using the Software
Adjusting the LCD Display
Troubleshooting
Specifications
Information
Appendix
The color and appearance of the product may vary depending on the model, and the product specifications are
subject to change without prior notice for reasons of performance enhancement.
Connections
Note
• Only the supplied bolts should be used.
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
Installing the Semi Stand
A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Monitor , where the stand is
1)
inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT
(sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.
2) Set up the left and right stands respectively.
Insert the stand into the hole at the bottom of the LCD Monitor.
3)
Insert the screw into the hole indicated and tighten it. (M4 x L15)
Caution
Installing the Stand KIT
Left stand
Caution
Make sure to install the stand with the Caution label
folded backwards.
Right stand