Installation; Required Tools And Materials; Camera Package Contents; Installation Steps - Avigilon 1.0-H3-DP1 Installationsanleitung

Installation

Required Tools and Materials

• Small slotted screwdriver with 5/64" or 2 mm blade width
— for connecting power when not using Power over
Ethernet.

Camera Package Contents

Ensure the package contains the following:
• Avigilon High Definition IP Dome Camera
• Terminal block
• T20 TORX tamper resistant key
• Teflon Sealing Tape

Installation Steps

Complete the following procedures to install the dome camera.
1. Removing the Dome Cover on page 4
2. Mounting the Dome Camera on page 5
3. Connecting Cables on page 7
4. Assigning an IP Address on page 8
5. Accessing the Live Video Stream on page 9
6. Aiming the Dome Camera on page 9
7. Installing the Dome Cover on page 9
8. Focusing the Dome Camera on page 10

Removing the Dome Cover

Remove the dome cover by loosening the 3 tamper-proof screws that
fix the cover to the base. The tamper resistant key included with the
dome camera can be used to loosen the screws.
NOTE: Be careful not to scratch the dome bubble.
4