Shut Down; Service And Maintenance; Service - Rothenberger R 140 B Bedienungsanleitung

Warning! If working in manholes or tunnels, are always two persons necessary. One
person controls the leverage in the manhole, the second operates the machine. Please
note, that the working arc is not rising higher than 1.5m as the bottom. Further the
working arc does not to be too close. Risk of sharp bending!
Warning! If sharp bend arise at the leverage, derating the machine immediately,
switch over to idling speed and switch off. Carefully remove manually the rods.
3.7

Shut down

After use, switch reverse gear over to idling speed (1a), turn switch to "OFF"(A) , and close fuel
tap (B). Remove spirals out of the pipe and out of the machine. Depose spirals into the basket.
Prior clean up tools and spirals. Release fixing brake (4).
If working with leverage, uncouple leverage segmental, cleaning and store accordingly with the
cleaned leverage tool.
4.

Service and Maintenance

4.1

Service

All maintenance, recondition and repair work shall only be carried out by an introduced
professional repairing person. The ROTHENBERGER service locations or else the manufacturer
with his repair department are available to help you. Needless to say, we will also send you
spare parts at short notice. Please contact please your retailer or the manufacturer.
12
right wrong
ENGLISH