Technical Data; Warranty - GOK NDR 0515 Montage- Und Bedienungsanleitung

TECHNICAL DATA

Inlet pressure p
optionally
Outlet pressure p
d
optionally
Nominal flow rate M
Nominal flow rate M
from an inlet pressure
Maximum permissible
pressure
Nominal width
Ambient temperature
Nominal response
pressure
Thermal shut-off device,
TAE
Overflow volume of GS
excess flow valve option
maximum permitted
pressure drop in
downstream installation
Thermal shut-out device
"T" (TAE)
* thermal resistance: In case of fire with external thermal exposure up to 650°C for
a period of 30 minutes, no dangerous gas-air mixtures may form.
Refer to the type label of the pressure regulator for more technical data and special
settings!

WARRANTY

We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.
12 / 12
Low pressure regulator Type NDR 0515 and Type NDR 0516
Type NDR 0515
g
of 0,5bar = 30kg/h
g
of 1,0bar = 45kg/h
of 1,5bar = 60kg/h
Melting temperature of the soldering material from 100°C
Regler- und Armaturen-Gesellschaft mbH & Co. KG
Obernbreiter Straße 2-18 • 97340 Marktbreit / Germany
Tel.: +49 9332 404-0 • Fax: +49 9332 404-43
E-Mail: info@gok-online.de • www.gok-online.de • www.gok-blog.de
0.5 to 2.5bar or 0.5 to 4.0bar
29, 37, 50 or 67mbar
up to 60kg/h
PS16bar or PS5bar (TAE)
DN 15, DN 20 or DN 25
-20°C to +50°C
OPSO:
PRV: 150mbar (optional)
2 to 30L/h air
∆P2 for p 29mbar, p
d
∆P5 for p 37mbar, p
d
Response temperature:
thermal resistance*:
Type NDR 0516
up to 12kg/h
of 0,5bar = 6kg/h
of 1,0bar = 8kg/h
of 1,5bar = 12kg/h
120mbar
37mbar
d
50mbar, p 67mbar
d d
+100°C
+650°C
part no. 05 151 50 g
DN 15