Advanced Setup - Bosch FlexiDome XF VDC485V03-10 Installationshandbuch

FlexiDome | Installation Manual EN | 17
XF & DN
Advanced Set-up
The FlexiDome normally provides an optimal picture without the
XF&DN
need for further adjustments. However, advanced set-up options are
available for getting the best results from the camera under special
circumstances. There are two upper level menus; a Main menu and an
Installer menu.
The Main menu allows you to select and set-up the picture enhancement
functions. If you are not happy with your changes, you can always recall
the default values for the mode.
The camera also has an Installer menu in which the installation settings
can be set.
The Main and Installer menus have functions that can be selected directly
or submenus for more detailed set-up.
Accessing and navigating menus
Five keys are used for navigating through the various menus. To access the
set-up menus, press the menu/select key (center). The main menu appears
on the OSD. Use the arrow keys for navigation.
When the Bilinx™ communications link is active, the buttons on the
camera are disabled. You can also set up Bilinx™ so that the camera
buttons remain disabled even when Bilinx™ is not actively controlling the
camera. This prevents unauthorized change of the camera settings.
Bosch Security Systems | 2005-10 | V1.0