Safety Information; Your New Appliance - Dimplex DEC 1802 Gebrauchsanweisung

Please read the Operating Instructions carefully before using the appliance!

Safety information

I
Installation and first commissioning should only be undertaken by an authorized technician
according to the attached Assembly Instructions.
I
Repairs must only be undertaken by an authorized technician to exclude any potential risks
involved.
I
The continuous-flow heater must only be installed in a frost-free room.
I
The tap mixer and warm water pipe can get hot.
Keep children away from the appliance.

Your new appliance

I
The electronic "exclusive" continuous-flow heater warms water while it is passing through the
appliance.
I
The continuous-flow switches itself on and heats the water when the warm water tap is
opened. It switches itself off again when the water tap is closed.
How to operate the continuous-flow heater
Select the shower temperature
The default setting for the water temperature af-
ter the first start-up is 39 °C.
I
You can select the desired temperature by
turning the continuously variable rotary
knob, which can be adjusted from 30 °C to
60 °C. The colored display lighting indicates
the temperature range during operation by
means of blue or red hues.
Info: The temperature shown in the display is
the water temperature inside the appliance.
The temperature of the water leaving the tap
can vary from this due to heat losses in the
pipework.
Ideal temperature
You also have the option of choosing between
two preset temperatures.
40 °C = Button
60 °C = Button
7