Herunterladen Inhalt Inhalt Diese Seite drucken

Tube Replacement; Specifications - Fender Super Champ X2 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
M. POWER CORD SOCKET — Connect to a grounded outlet using
the included power cord in accordance with the voltage and
frequency ratings specified on the rear panel of your amplifier.
N. POWER SWITCH — Switches the amplifier ON–OFF.
O. FUSE — Protects the unit in case of electrical faults. Replace
only with the type and rating specified on the rear panel of
your amplifier.
P.
SPEAKER OUT — Connection for the internal speaker (Combo
unit only) or an external speaker (8Ω/15W minimum).
Use only a standard 1/4" mono plug.
Q. LINE OUT — Connection for recording or sound reinforcement
equipment.
Use only a standard 1/4" mono plug.
Your new Fender® amplifier comes equipped with the
highest quality tubes available, sourced from various
manufacturers all over the world. Because of occasional
irregularities in supply, the specific tube type used in
each amplifier is subject to change without notice.
When replacing output tubes, please note the specific
tube markings on the original tubes factory supplied
with your amplifier. For example, 6V6 output tube types
used by Fender include, but are not limited to: 6V6C; 6V6CQ; 6V6RD, etc. The
installation of a different type may require significant adjustment by a qualified
technician to avoid reduction in performance and tube life.
SUPER CHAMP X2 COMBO
TYPE:
PR 2259
PART NUMBERS:
2223000000 (120V, 60Hz)
2223001900 (110V, 60Hz) TW DS
2223004900 (230V, 50Hz) UK DS
2223006900 (230V, 50Hz) EUR DS
2223008900 (220V, 50/60Hz) CN DS
POWER:
REQUIREMENTS: 90W
INPUT IMPEDANCE:
>1MΩ
SPEAKER:
One 8Ω, 10" Fender® Special Design (P/N: 0091245000)
FUSES:
F3AL, 250V for 100V/120V versions
TUBES:
One 12AX7 and Two 6V6
FOOTSWITCH (OPTIONAL):
P/N: 0071359000 (Channel select, Effects bypass)
DIMENSIONS:
HEIGHT: 15.0 in (38 cm)
DEPTH: 9.2 in (23.3 cm)
WEIGHT:
24 lb (10.9 kg)
Rear Panel
Rear Panel
R.
S.
• Use Fender® FUSE™ software to control your Super Champ X2

Tube Replacement

Tube Replacement
Additionally, Groove Tubes® tests and sorts many of our output tubes based on
their measured performance. The sorted tubes are marked with a label on the
base with coarse ratings of BLUE, WHITE, & RED plus fine ratings of 1-10. If your
amp came supplied with, for example, a pair of matched 6V6 power tubes ranked
at WHITE-6, then any pair of 6V6 power tubes marked with a course rating of
WHITE will be a good replacement. If the tube replacements are marked as
WHITE-6, they will be a perfect direct replacement.
If you have questions or concerns, contact your Fender dealer or authorized
service center.

Specifications

2223000900 (120V, 60Hz) DS
2223003900 (240V, 50Hz) AUS DS
2223005900 (220V, 50Hz) ARG DS
2223007900 (100V, 50/60Hz) JPN DS
2223009900 (220V, 60Hz) ROK DS
OUTPUT: 15W RMS into 8Ω
F1.6AL, 250V for 230V/240V versions
WIDTH: 17.5 in (45 cm)
Product specifications are subject to change without notice.
f e n d e r . c o m
f e n d e r . c o m
FOOTSWITCH — Connect the optional 2-button footswitch
here with the supplied cable to enable remote channel
selection and effects bypass. The CHANNEL SELECT {C} button
is disabled when the footswitch is connected.
If you need a longer footswitch cable, use (unshielded) speaker cable
rather than (shielded) guitar cable.
USB — Use the USB port to connect the Super Champ® X2
amplifier to your computer and stream audio to your favorite
recording software. Also:
amplifier from your computer and to access bonus amp
features not available from the Super Champ X2 alone.
Please download Fender® FUSE™ software and the owner's manual
from fuse.fender.com.
SUPER CHAMP X2 HEAD
PR 2260
2223100000 (120V, 60Hz)
2223101900 (110V, 60Hz) TW DS
2223104900 (230V, 50Hz) UK DS
2223106900 (230V, 50Hz) EUR DS
2223108900 (220V, 50/60Hz) CN DS
REQUIREMENTS: 90W
>1MΩ
Recommended: Super Champ SC112 speaker enclosure (P/N: 2223200000)
F3AL, 250V for 100V/120V versions
One 12AX7 and Two 6V6
P/N: 0071359000 (Channel select, Effects bypass)
HEIGHT: 8.0 in (20.3 cm)
DEPTH: 8.5 in (21.6 cm)
18.5 lb (8.4 kg)
2223100900 (120V, 60Hz) DS
2223103900 (240V, 50Hz) AUS DS
2223105900 (220V, 50Hz) ARG DS
2223107900 (100V, 50/60Hz) JPN DS
2223109900 (220V, 60Hz) ROK DS
OUTPUT: 15W RMS into 8Ω
F1.6AL, 250V for 230V/240V versions
WIDTH: 17.5 in (45 cm)
7
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis