Front Panel - Fender Super Champ X2 Bedienungsanleitung

The Super Champ® X2 amplifier combines a real tube amp with
modern "extras" like versatile amp voicing and a wide palette of
quality effects. It's simple, toneful, and flexible. With computer hook-
up, you can also custom-tailor your amp's voicing and effects to your
personal taste. There's no limit to the number of tones that can be
coaxed from this little firecracker, so your practice and recording
sessions will really come alive with the Fender® Super Champ X2.
Features Include:
• 15 Watt tube power amp with two 6V6 tubes
• 12AX7 preamp tube
• 10 inch Fender Special Design speaker (combo amp)
• Voicing knob with 16 different amp types (Tweed, Blackface,
British, Metal, etc.)
A. INPUT — Plug your guitar in here.
B. VOLUME 1 — Adjusts the loudness of Channel 1. This channel is
voiced for Fender Blackface™ clean tone.
C. CHANNEL SELECT — Press to switch channels.
Channel 1
D. GAIN — Controls preamp volume and the level of signal
distortion for Channel 2.
E. CHANNEL LED — Illuminates when Channel 2 is active.
Channel 1
F. VOLUME 2 — Use to set the overall loudness of Channel 2 after
adjusting GAIN {D}.
G. VOICE — Your Super Champ X2 comes equipped with 16
Channel 2 amplifier voicings, listed in the table below. You can
customize this list by using your computer and Fender® FUSE™
software available free of charge at: fuse.fender.com.
1 Tweed Champ®
2 Tweed Deluxe™ clean
3 Tweed Deluxe™ dirty/compressed
4 Tweed Bassman®
5 65 Princeton® clean
6 65 Princeton® dirty/compressed
7 65 Deluxe™
8 65 Twin Amp™
9 60s British clean
10 60s British dirty/compressed
11 70s British
12 80s British
13 Super-Sonic™
14 90s Metal
15 2000 Metal
16 Jazzmaster™ (fl at, solid-state clean)
6 6
Super Champ® X2 Amplifier Super Champ® X2 Amplifier

Front Panel

Front Panel
Channel 2
Channel 2
f e n d e r . c o m f e n d e r . c o m
• Two channels with channel-switching format (optional footswitch
available, P/N 0073858000)
• 15 effects with effects adjust control
• TAP tempo control for delay time/modulation rate adjustments
• External speaker capability
• ¼" Line output
• USB output for speaker-emulated digital recording
• software (free download) allows additional flexibility:
• • Change the amp's selection of amp voicing and effects defaults
• • Deep editing of effects parameters
• • Online access to free content from the Fender community
♫
Use the extreme flexibility of the VOICE knob wisely! Treble harshness
or boomy bass tones can be avoided by using the right guitar settings
and playing style for a particular amp voicing.
H. TREBLE/BASS — Adjusts the high- and low-frequency tone
characteristics of both channels.
I. F/X ADJUST — Adjusts the "main setting" of the active effect.
For most effects, this will be the effect level.
♫
You can observe and customize the F/X ADJUST knob functions
and change the F/X SELECT effects list by using your computer and
Fender FUSE software.
J. F/X SELECT — Selects the active effect.
OFF 1 No Eff ect
VIBRATONE 1 Rotating Baffl e, Slow
2 Rotating Baffl e, Fast
DELAY 1 ~130ms (Slapback)
2 ~300ms
REVERB 1 Large Room
2 Concert Hall
3 Classic Fender® Spring Reverb
4 Reverb + Delay
CHORUS 1 Fast Sweep
2 Deep Sweep
3 Chorus + Delay
4 Chorus + Reverb
TREMOLO 1 Low Speed
2 Medium Speed
3 High Speed
K. TAP — Depending on the selected effect, the TAP button can be
used to tap in the delay time or modulation rate by pressing TAP
twice rhythmically in sync with the desired interval. The TAP LED
blinks at the current delay/modulation interval. Press the TAP button
once to set the delay/modulation interval to its maximum value.
L. POWER JEWEL — Illuminates when the unit is on.