Siemens 7KG6131 series Betriebsanleitung Seite 39

Transducer with a linear characteristic
input and output unipolar or
input and output symmetrically bipolar
BR11.1 – BR11.2 : open
BR12.1 – BR12.2 : open
X14.1 – X14.2 : closed
Zero adjustment
Apply E = 0 ± 0.05 % E
value to A = 0 ± 0.1 % A
End value
Apply E = E ± 0.05 % E
N
potentiometers R42.
Check the intermediate values.
With bipolar input and output, feed in positive and negative values and check
symmetry.
Transducer with a linear characteristic
input symmetrically bipolar -E
output unipolar 0 to +A
BR11.1 – BR11.2 : open
BR12.1 – BR12.2 : open
X14.1 – X14.2 : closed
Zero adjustment
Apply E = -E ± 0.05 % E
N
potentiometer R41.
End value
Apply E = EN ± 0.05 % E
trimming potentiometer R42.
Check the intermediate values.
BR11.2 – BR11.3 : open
, or short-circuit (terminals 11 and 12), set the output
N
with trimming potentiometer R41.
N
, set the output to A = A
N
to 0 to +E
N
N
BR11.2 – BR11.3 : closed
, set the output value to A = 0 ± 0.1 % A
N
, set the output end value to A = A
N
SIMEAS-T - Transducer with Auxiliary Power
± 0.1 % A with trimming
N N
N
with trimming
N
± 0.1 % AN with
N
39