General Remarks - Siemens 7KG6131 series Betriebsanleitung

2.6 General remarks

These operating instructions include the information required for appropriate
use of the products described therein. The document is addressed to technical
personnel with special qualifi cations or know-how in the fi eld of instrumentation
and control engineering, in the following referred to as automation
engineering.
Knowledge of and compliance with the safety notes and warnings described
in this manual are a basic requirement for safe installation, commissioning,
operation and maintenance of the product described. Only qualifi ed personnel,
as described below, have the required expert know-how to correctly interpret
and apply the general safety notes and warnings in each specifi c case.
These operating instructions are part of the scope of delivery. In order to preserve
the lucidity of the text, not all details of the various models have been included.
Similarly, it is not possible to describe all possible installation, operation and
maintenance procedures in this text. If further information is required or if
special problems occur which are not suffi ciently described in this document,
please request the specifi c information from your local Siemens offi ce or contact
one of the departments listed on the back cover of this manual.
Furthermore, it should be noted that the contents of this product documentation
are neither part of a previous or an existing agreement, commitment or legal
relationship nor do they affect such a relationship in any way. All Siemens
obligations derive from the respective sales contract, which also includes the
complete and exclusive warranty agreement. This warranty agreement is neither
extended nor restricted by any statements in this manual. The auxiliary power
supply of the units must be equipped with an interrupter, such as an automatic
circuit-breaker. This must be marked and installed in the vicinity of the units.
Í Í Í
!
Certain parts of electrical appliances are inevitably under hazardous voltage
during operation. Grievous physical injury or damage can occur if the safety
warnings are not heeded.
Only suitably qualifi ed personnel should service this appliance. Appropriate
transportation, storage, installation, assembly, operation and maintenance are
basic requirements for correct and safe operation of this appliance.
Units and appliances are tested with regard to their dielectric strength at 5.55
kV/3.7 kV; their output circuits, however, do not carry functional extra-low
voltages with safe separation according to VDE 0100, Part 410. This must be
taken into account when using these units and appliances.
SIMEAS-T - Transducer with Auxiliary Power
WARNING
27