Assignment Of The Dmx Channels In The Overview - involight LEDArray58 Bedienungsanleitung

MICROPHONE SENSIVITY:
The sensitivity with which the headlamp reacts to the music signals (bass impulses).Press the
until the display shows
select the microphone sensitivity
can now set the desired microphone sensitivity. The height is the value, the more sensitive the microphone reacts
to the music signals (bass impulses) in the environment.
SILENT-MODE:
The Silent mode refers to the music-controlled operation and is also known as Intelligent Sound Control. If the
silent mode is activated
impulses), the light beams of the device switch off (BLACKOUT). If the silent mode is deactivated
current program of the device will continue slowly, even if no further music signals (bass impulses) are received.
"Menu"
Press until
"Enter"
Press again to select
can now activate the silent mode
IRC-CONTROLLING:
"Menu"
Press the
"Enter"
again to select
activate the IR remote control
DMX-MODE:
To select the DMX mode and set the start address, press
"Enter"
appears. Press
select DMX start address
now set the desired start address.
MASTER/SLAVE-OPERATION:
Der „VENTUS M" kann mit weiteren Geräten verlinkt werden. Um ein Gerät als
drücken Sie die Taste
„ Enter" .
Wählen Sie am Master-Gerät das gewünschte Programm. Die zusammengeschalteten Geräte
arbeiten nun synchron.

3.3 Assignment of the DMX channels in the overview:

NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and programmed with a DMX controller.
1 Channel mode:
0-9
10-49
50-89
CH1 90-129
130-169
170-209
210-255
"Sens".
The microphone sensitivity menu is displayed. Press
"SE-1"
"ON"
and the microphone of the device does not receive any music signals (bass
"SILE"
is displayed. The menu for silent mode is displayed.
"ON"
"ON"
or deactivate
key until the display shows
"ON" "OFF".
or
"ON"
or deactivate
again to select
"d1" "d512".
to
„ Menu"
bis im Display
No Function
Auto Program 1: LED 1-5 + SMD LED
Auto Program 2: ONLY LED 1-5
Auto Program 3: ONLY SMD LED
Sound Program 1: LED 1-5 + SMD LED
Sound Program 2: ONLY LED 1-5
Sound Program 3: ONLY SMD LED
"SE-9".
to With the
"OFF".
or With the
"OFF".
"INFR".
The IR remote control menu is displayed. Press
"Up"
With the
"OFF".
"Menu"
"4CH" "8CH"
or
"Up"
With the
„ Slav"
22
"Enter"
"Up" "Down"
and
"Up" "Down"
and
"Down"
and buttons you can now
"ADDR"
button until the
"Setup"
mode. Press
"Down"
and
„ Slave"
erscheint. Bestätigen Sie mit der Taste
"Menu"
button
again to
buttons, you
"OFF"
, the
buttons you
display
again to
buttons, you can
einzustellen,